quickbooks error h202 springs up when you attempt to get to QuickBooks in multi-client mode and the multi-client association with the worker is stuck. H202 mistake may happens on the grounds that the organization record is on an alternate PC and QB needs some assistance interfacing it. At the point when this blunder experiences, a QuickBooks client incapable to open an organization record set on another PC. Along these lines, given beneath are the causes, indications, and solutions for fix this blunder. For specialized help, contact QuickBooks Support to converse with our professionals.
Methods to fix QuickBooks Error H202
Method – 1: Network Connectivity Testing and Calibration
Open QuickBooks on all the computers networked for using QuickBooks.
Click on the File menu and select Utilities and turn of hosting.
Press windows key and type this “This PC” on the QuickBooks Host Computer.
From the left windowpane double-click the Network option to verify that all the networked are visible.
Ping all the workstations respectively from the QuickBooks Host / Server computer.
Start to ping the QuickBooks Server / Host from the computer showing QB Error Code H202.
The command for the ping test has to be done on Command Prompt.
Ping command syntax: ping [Computer Name] and press Enter.
Method – 2: Analyze Network issues with QuickBooks Connection Diagnostic Tool
QuickBooks Connection Diagnostic Tool
Download and install the QuickBooks Connection Diagnostic Tool.
Run the tool and Scan the QuickBooks Company file folder.
Take note of the IP address shown when the tool runs.
Enable the ports which have the Open Ports Button in the firewall Status section.
Follow the wizard instruction till the end.
Try to open the file from the computer where Error Coder H202 occurs.
I hope both these methods will be helpful!
Mark Wilson